Filter
Top Products
8. Repeat steps 4 to 7.
Conditions
l
Use the “+‘I, or “Q” button
for
scrolling the
display.
9. To exit
from
speed dialing entry, press the
END button.
eThe LCD will show .the initial program
mode, “ENTER PGM CODE”.
To change
Repeat steps 1 to 9.
:
To erase after programming
i
i
[
1.
Dial (01) or press the AUTO button.
“SPEED DIALING” will be displayeci.
1
i
2. Press rhe SEXT button.
\
“ENTER SPEED CODE”
will
be dis-
plaJ?ed.
i
I
:
: :
3.
Dial (00
throqiz
99)
or press the NEXT
butron,
for
speed access code entry.
1
The speed access code and the phone number
will be displayed.
1
1 4. Press the CLEAR burton.
I
L
5.
Press
the MEMORY button
6. To program desired speed access code, press
the SELECT blctton and then dial the speed
access code.
To advance to the next speed access code,
press
the NEXT button.
Tti return to the previous speed access code,
press the PREV button.
7. Repeat steps 4 to 6.
8. To exit from speed dialing entry, press the
END -buttwl.
eThe line access number (9
or
81 through 86)
should be stored.
o When dialing,
the pause is automatically
entered after line access number (9 or 81
through 86).
econtinuous use
of
speed dialing is possible.
Example:
[AUTO] [Ol] [AUTO] [02]
In this case, speed access code “02” should not
include the line access number.
There is a phone number directory on page
6-12.
3-6