I
.‘...“‘-...“-....-~-..-.-..
[28] [SELECT] [MEMORY] [END]
Description
This will
inform you that
you keep holding the
line by ringing, after the time passes.
Programming
1. Dial (28).
“TIME: 30 SEC” will be displayed and
“30 SEC” will blink.
2. Keep pressing the SELECT brlttotl until the
desired time is displayed.
3. Press the MEMORY button.
4. To return to the initial programming mode,
press the END button.
Example:
2 mimtes=[28] [SELECT] [SELECT]
[MEMORY] [END]
Programming Table
See page 41.