Filter
Top Products
To lock
DIAL'%"
I
LIFTHANDSET
ORPRESS
"SP-PHONE"
-
HANGUP
ORPRESS
"SP-PHONE"
DIAL
LOCKCODE
(OOOthrough
999)
DIAL LOCK
CODEAGAIN
DIAL"#"
To unlock
J
DIAL "%"
HANGUP
ORPRESS
"SP-PHONE"
DIAL
LOCKCODE
(OOOlhrough
999)
I
LIFTHANDSET
ORPRESS
"SP-PHONE"
OlAL"6"
To
conjirtn the lock code (extension ‘1 only)
0 Be sure the handset is in the cradle and the SP-PHONE button is off.
eSet the MEMORY switch of the KX-T61630 to “PROGRAM”.
0 You may use the NEXT or PREViOUS bulton
instead of dialing the Extension Number.
OlAL"8" OIALTHE EXTENSION PRESS
NUMBER(11 through 26)
"END"
LOCKCODEWILLEE
DISPLAYED
After conjirming all the codes, return
the MEMORY switch to “SET”.
\
Description
To
unlock
<-___
1. Lift the handser or press the SP-PHONE but-
ton.
2. Dial (6).
3. Dial the lock code.
4. Dial (#).
“ID CODE RESET” will be displayed.
5. Hang up or press the SP-PHONE button.
Locking an estension prohibits another uset
from dialing on an outside line until unlocked.
Even the emergency call can not be dialed.
The followings are possible at the locked exten-
sion.
Receiving an outside call
Dialing and receiving an infercom call
Call pick up
Dialing and receiving a doorphone call
Dialing a door opener, etc.
Conditions
l
When dialing to an outside line using a locked
exfetuion, reorder to;ie will be heard.
l
Lock code must be 3 numerical*digits except the
“#” and “Jc” buttons.
OIf you use a standard telephone;
To lock, dial (0) instead of (#) at step 5.
To unlock, dial (0) instead of (#) at step 4.
a)
Note:
To operate features after setting “Auto CO Hunt-
ing”, press the ICM button instead of lifting the
handset al step 1. This is because lifting the Iiandset
causes the line IO be connected to a CO line.
Operation
.To lock
1. Lift the handset or press the SP-PHONE but-
l0t1.
2. Dial (6).
3. Dial the lock code.
Lock code must be 3 digits (000 through 999).
4. Dial Ihe same lock code again.
5. Dial (#).
- “ID CODE SET” will be displayed.
6.
Hang up or press rhe SP-PHONE button.
22
- _