Filter
Top Products
;----------------.u,Iril the desired extension number appears
.;-w.‘-- until the desired mbde appears
AUTq.$NS,WER . . . . . . . 1 . . . default (iili6 exte&is)
+f&r; gNs~,ji~~. ,-: .:
i
,>; :, ,-. : ) .Y: : ,: :
_ I,‘.,
:
[16] [NEXT] [NEXT] [SELECT] [MEMORY][END]
t
[:;I [NEXT] [ABI [SELECT] [MEMORY][END]
i
‘~.-~-~-~~~---.~.~-~..-~-
AB=[%]:
to assign the same on all 16 extensions
Description
Conditions
By programming either automatic or manual
answering can be set. The auto mode allows the
user to answer incoming outside calls simply by
lifting the handset, while
if
programmed to the
manual mode, the user must
lift
the handset and
press the flashing CO button.
e When you start the programming from step 1,
you may dial the desired extension number
instead
of
the NEXT button at step 3.
*The PREV button allows you to go to the
previous extension
for
displaying the auto-
matic answering selection.
Programming
I. Dial (IS).
“CO ANSWER MODE” will be displayed,
Examples:
l AUT0 ANSWER mode on the extension 11
[16] [NEXT] [I 11 [MEMORY] [END]
,3:] [NEXT] [NEXT] [MEMORY][ENDl
*MANUAL ANSWER mode on the extension
2. Press the NEXT button.
“ENTER EXT NO” will be displayed.
3. Press the NEXT button.
“11: AUTO ANSWER” will be displayed
and “AUTO” will blink.
I2
[16] [NEXT] [12] [SELECT] [MEMORY]
[END1
&I [NEXT] [NEXT] [NEXT] [SELECT]
[MEMORY] [END]
4. Press the SELECT button to alternate be-
tween
AUTO ANSWER and MAN
ANSWER to select the desired mode.
Programming Table
See page 6-16.
5. Press the MEMORY button.
The LCD will stop blinking.
6.
Repeat steps 3 to 5,
to
program the mode
selection
of the other extensions.
7. To return to the initial program mode, press
the END button.
3-25