Filter
Top Products
PROGRAMMING
To activate this system, the requirements from telephone company and the customer must be programmed once the
Power Switch has beet1 turned on.
1. At extettsiotl 11:
All system programtnittg changes (example: sy’s-
rem clear. station progratn clear, toll restrictiotl,
hookswitch Posh timing.. .) are dotie throrigh
estetfsioti Il.
OExtensiort II must always be a Panasonic
model, KX-T61630.
2. System Program Sw,itch setting:
The System Progratn Switch located ott the
KX-T61610 must be set to the PROGRAM
position while making program changes. After all
programming changes are completed, return the
program switch to the SET position.
3. Overlay:
This overlay is used for progratmnit~g the system
and the program function names are inscribed on
this card. Refer to page 3-2.
4. Before systetn programming, operate the system
clear and station program clear to set to the
default data of the progratntnittg.
A. Systetn Clear:
1 Dial (99).
o”SYSTEtVI CLEAR” lr’ill be displayed.
2 Press the NEXT button.
o”A LL CL E.4 R?” \c*ill be displayed.
3 Press the MEI\IORY button to clear system.
4 To exit from system clear. press the END
brittott.
The followitlg feutures ure preset as the defatrlt
data.
Dute uttd Time Setting
Systetn Speed Dialing
CO Cotmectiott Assigtrtnettt
Dirt1 Mode (TottelPtrlse) Selection
Slvitchittg Mode (DaylNight Service)
Startittg Titne (DaylNight Service)
Flexible Day Outward Dialing Assignment
Flexible Night Olrtward Dialing Assigtmetlt
Flexible Day Ritlgitrg Assigtlment
Flexible Night Ringitlg Assignment
Toll Restrictiott-Cluss Assignment
Toll Restriction-Areu Code Selectiotz
Progrcttntnable Operutor Cull
Host PBX Access Codes Assignmettt
A tttomatic Atu~vering (A utomuticlMat~uu1)
Selectioti
Preferred CO Litze Assignment
Programmable Cull Waiting
Dltratiotl Time Count Start Mode
SMDR Cotntnunicutiotz Paratneters
System Data Dutnp
SMDR It~cotninglOutgoing Selection
Hookswitch Flash Tin@
Discotztlect Time
Calling Party Control (CPC) Signal
ltlrercotn Alerting Mode
Progratntnable Doorphone
Dial Call Pickup Group Assigtltnetlt
Account Code Input Mode
Delayed Ringing Assigtnnetit
Delayed Ringing Count Selection
DSS Console Assigtmzettt
Hold Time Retnitldet
Hold Recall Titne Set
Programmable External Paging Access Totle
DTMF Receiver
Programmable Toll Prefix
Programmable Secret Speed Dial
Programtnable Directory Assistance
DSS Button Mode
Transfer Recall Tinte
M3IFWD Selection
B. Station Progratn Clear:
1 Dial (98).
*“EXT CLEAR” bvill be displayed.
2 Press the NEXT btrtto:z.
*“ALL CLEAR?” isill be displayed.
3 Press the MEMORY button to clear the
system.
4 To exit from station clear, press the END
button.
The follonittg fcutL(res are preset ns the
defatrlt data.
Otte Tortch Dialittg
Backgroutld Music
Cull-~For~vardittg
Data Line Security
Dial Call Pickup Detty
Do trot Disturb
Auto CO Hunting
Pickup dial
Flexible CO Button
Flexible DSS Buttot
- L
3-l