Panasonic KX-T61610 Switch User Manual


 
:-----------.1&l the desired extension number appears
[18] [NEXT] INEkT] [SE<ECT] [MEMYRY] [END]
or
[18] [NEXT] [ABI [SELECT] [MEMORY] [END]
i
--~---~.~--.~--~~.~~~~~~~ AB=[$]: to assign thesame on all16 extensions
Description
Conditions
When any itlcoming ctrlls from the Central Office
are recei\*ed at the same time, you can receive the
call on the preferred CO line first.
Programming
I. Dial (18).
“PREFERRED CO” will be displayed.
2. Press the NEXT button.
“ENTER EXT NO” will be displayed.
3. Press the NEXT button.
“II: . . . . ‘9
will be displayed and
It. .
l l
will blink.
4. Repeat pressing the SELECT button until the
desired CO number is displayed.
5. Press the MEMORY button.
The LCD will stop blinking.
6. Repeat steps 3 to 5, to program the assign-
ment of the other extensions.
7. To return to the initial program mode, press
the END button.
l
When you start the programming from step 1,
you may dial the desired extension number
instead
of
the NEXT button at step 3.
OThe PREV button allows you to go to the
previous extension for displaying the preferred
CO line assignment.
Programming Table
See
page 6-17.
- _
3-27