PRESS
“SP-PHONE”
PRESS
“REOIAL”
Descrip tiorz
The last phone number dialed 011 an oulgoirlg
call to CO line can be redialed up to 1.5 times.
This feature is available for otlly KX-T7020,
KX- T7030, KX- T7050 and KX- T7130.
Operation
1. Press the SP-PHONE buttorl.
2. Press [he REDIAL button.
You may press the CO button to select he CO
line directly after pressing the SP-PHONE but-
toll.
Conditions
0 TO camel automatic redialiug, press the
FLASH button.
0 Pressirlg the REDIAL or SAVE button allows
):OLl to:
,
- Redial once wl~en~ using the handset.
- Redial up to 15 times with 10 minutes when
using the Redial feature with the SP-
PHONE button.
PRESS “CO”
WHICH YOU
WANT TO
CHANGE-TO
DIFFERENT
CO NUMBER
DIAL “0” DIAL PRESS
CO NUMBER
“MEMORY”
Description
Allows each CO butron slumber to be changed
to a different CO number.
Operation
l
Be sure tire harldset is on the cradle and the
SP-PHONE button is off.
l Set the MEMORY switch of the proprietary
telephotle to “PROGRAM”.
1. Press rile CO button which you rvarlt to
change to a differerlt CO tuonber.
Wllerl pressing CO 1 button, “CO 1” will be
displayed.
2. Dial (0).
“CO” will be displayed.
3. Dial the new CO number (1 througlz 6).
Wllen dialhg (2),
“CO 2” will be displayed.
4. Press the MEMORY button.
l
After programning,
return tke MEMORY
s,~~itclz I0 the “SET” position. :
1
Conditions
If you program the same CO number as another
CO button, the original one will be cleared.
l
Initial assignment (default) far the flexible but-
. tons is as follows:
l
CO1 button...COl
CO7 button...DSSll
*
CO2 button...C02
CO8 button... DSSl2
I
CO3 button...C03
CO9 button...DSSl3
CO4 button...C04 _.
CO10 button...DSSlI
CO5 button...COS
CO11 button...DSSlS
COG button...C06
CO12 button...DSS16.