Filter
Top Products
I. Turn the Power-Switch to ON
, . . . . . . . . . . . . . . . . . . . . . . . . .
2. Set the System Program Switch to PROGRAM , . . . . . . . . . . .
The LCD on the KX-T61630 will show “ENTER PGM
CODE”.
@Be sure the handset
of
extension 11 is in the cradle and the
speakerphone button
off.
3. To program automatic line access number 9 and the phone
number 987-654-3210 speed access code 00. (Refer to page
3-5.)
KX-T61630 at extension I1
(Extension 11 must be a KX-T61630.)
Dial (01) or press the
A UT0 button.
Press the NEXT button.
Dial (00) or press the
NEXT button.
@ Press “-‘I button.
@ Dial “654”.
@ Press “-“button,
@ Dial “3210”.
Press the MEMORY
button.
l-
I
C
I
Display
) SPEED DIALING ]
ENTER SPEED CODE
‘If
nothing is stored in
access code “OO”,
100: NOTSTORED ]
‘If
already stored the
automatic line access
number 9 and the
phone number
123-456-7890,
00: -123-456-7890
00: -987-654-3210 1
100: -987-6.54-3210 1
I
l
To program the next access code, press the NEXT
eYou will hear a beep after pressing the
button.
MEMORY button.
l
To program a desired access code, press the
SELECT button and then dial the number.
*
4. Return the System Program Switch to SET
q
To make program change, start from the beginning.
3-3
While programming
if
a mistake is made,
1. Press the “END” button.
2. Start programming procedure from
the beginning.
*The MEMORY indicator light will go on
when thF.MEMORY button is pressed, and
then the Indicator light will go out when the
NEXT or PREV button is pressed.
- -