Panasonic KX-T61610 Switch User Manual


 
A new line code indicates what type of code is
needed for the print head on a printer to move
the first character position on the next line.
CR+LF
when “CR+ LF” is required from a
printer.
CR
when “CR” is required from a printer.
i
CR= Carriage Return
LF= Line Feed.
A baud rate code indicates the data transmission
speed from the system to a printer.
110 B (when
110 baud is required.)
150 B (when
150 baud is required.)
300 B (when 300 baud is required.)
600 B (when 600 baud is required.)
1200 B (when 1200 baud is required.)
2400 B (when 2400 baud is required.)
4800 B (when 4800 baud is required.)
9600 B (when 9600 baud is required.)
,4,
.
The default value is the same as that of the
Panasonic data terminal, KX-D491OD, KX-
04911, KX-D4920 etc, except baud rate.
A parity code indicates what type of parity is
used to detect an error in a string of bits
composing a character.
NONE: when an error checking function is
not required from a printer.
MARK:
when a Mark is required from a
printer.
SPACE: when a Space is required from a
printer.
EVEN: when an Even is required from a
printer.
ODD:
when an Odd is required from a
printer.
A word length code indicates how many bits
compose a character.
7 BITS (when 7 bits are required.)
8 BITS (when 8 bits are required.)
A stop bit length code indicates the end of a bit
string which composes a character.
1 BIT:
when one bit is required for end
detection.
2 BITS:
when two bits are required for end
detection.
The page length may be selected to position a
title and data on each page.
A page length code indicates the number of lines
per page.
A title will be printed on the first 3 lines of each
page.
<I
STANDARD CONTINUOUS PAPER (11 inches)
we
length
-~.. -~.. . _ _ _ . . . _ _ . _ . . _ _ _ . . . _ _ . _ .
- - . - - . - - - . . - . .
0 0
0 0
t t
0 0
0 0
0 0
0 0 0 0
0 0
machine machine
0 0
0 0 0 0
0 0 perforations perforations 0 0
I
skip
perforation
3-38
To print data, page length must be longer than
skip perforation by 4 or more liries.