Filter
Top Products
t......-..........ul’lil the desired location number appears
[45] k&j [MEMORY] [END]
or
[45] [AB] [C] [MEMORY] [END]
Description
5. To advance to tlte next location number, press
Through programming, up to 5 carrier codes to
access OCC (otller common carrier), etc. can be
assigned.
When a phone number whiclz has an assigned
carrier code is dialed, Toll Restriction check
starts from the number that is dialed after the
carrier code.
the NEXT button.
To return to the previous location number,
press tlze PREV button.
To go to a desired location number, press the
SELECT button and then dial the number.
6.
Repeat steps 3 to 5.
Programmilzg
1. Dial (45).
7. To return to the initial programming mode,
press the EN? button.
“ENTER CODE NO” will be displayed.
Condition
2. Dial (00 through 04) or press the NEXT
button.
Example:
When dial (00) or press the NEXT button.
@The LCD will show “0O:NOT STORED”
when nothing is stored in location number
“00”. When the carrier code 10222 has been
stored, “00:10222” will be dfsplayed.
l
rrXjt,’ substitutes for any numbers.
Progra.mming Tables
See the back cover.
3. Enter the carrier code with up to 10 digits.
*To erase a wrong entry, press the CLEAR
button.
_:
4. Press the MEMORY button..
l
The memory indicator will be lit.