Filter
Top Products
;------------until the desired extension number
appears
; . . .‘.
:.
;-v’m’---- ,dial the CO number
:::,:;-” :,. :; . ..‘.‘-.
il
..j !23&56+.;.. .,:;.;:.
defaulf (all 16 &~eil&n~) :’
,. (CLEAR) ‘, .,.
,,.’ .‘. . . ....
[07] [NEXT] [NEiT] & [MEMORY][END]
t
PO:] [NEXT] [AB] [C...E] [MEMOFiY][END]
-
‘“--“-‘--‘---““-----~
AB=[*]:
to assign the same on all16 extensions
Description
Conditions
Through programming, you can select which
extensions may be used for outward dialing by
using the day mode
of
operation.
Programming
*When you start the programming from step 1,
you may dial the desired -extension. number
instead
of
the NEXT button at step 3.
@The PREV button allows you to go to the
previous extension
for
displaying the CO
assignment.
1. Dial (07).
“DAY: OUT CO” will be displayed.
2. Press the NEXT button.
“ENTER EXT NO” will be displayed.
3. Press the NEXT button.
“11: CO 12 3 4 5 6” will be displayed and “1
2 3 4 5 6” will blink.
4. Dial the CO number to be entered.
The desired combination
of
CO
lines
will be
displayed.
To prohibit dialing, press the CLEAR button
instead
of the
CO number.
“11: CO.....” will be displayed.
Exanzple: COMPANY XYZ
Company XYZ wants only extension 11 and 15
to have access to CO 1, 2 and 3 on outgoing
calls during the day. Extensions 12, 13, 14, 16,
17 and 18 are to be programmed
for access to
only CO 1 and 2.
1. [07]
[NEXT] [(NEXT) or (ll)] [l] [2] [3]
[MEMORY]
2. [NEXT] [I] [2] [MEMORY]
3. [NEXT] [l] [2] [MEMORY]
4. [NEXT] [l] [2] [MEMORY]
5. [NEXT] [l] [2] [3] [MEMORY]
6. [NEXT] [l] [2] [MEMORY]
7. [NEXT] [l] (21 [MEMORY]
8. [NEXT] fl] [2] [MEMORY] [END]
5. Press the MEMORY button.
The LCD will stop blinking.
Programming Table
6. Repeat steps 3 to 5, to program the assign-
ment on the other extensions.
See page. 6-15.
7. To return to the initial program mode, press
- .
the END button.
?-I<