Filter
Top Products
until the desired mode ajjtars
[39] [NEXT] [SELiECT] [MEMORY] [END]
Description
Programming
When a call is transferred to any extension, if
other extension does not receive the transferred
call within 30 seconds, the call will return to
you.
The time may be changed to 2 minutes.
1. Dial (39).
“XFER RECALL TIME” will be displayed.
2. Press NEXT button.
“30 SEC” will be displayed and blink.
3. Press the SELECT button to alternate be-
tween “30 SEC” and “2 MIN” to select the
desired mode.
4. Press the MEMORY button.
The LCD will stop blinking.
5. To return to the initial program mode, press
the END button.
Programming Table
See page 6-21.
3-53