[31] [NEXT
‘1 [SELECT] [MEMORY] [END]
until the desired time appears ’
:
30 SEC-- ; , . . . . ‘: . . default
1 MIN ; .,., .,
1.5 MIN
2 MJN .:
._.., ; -:
DISABLE i.‘. ‘- -~
Description
Example:
When the handset of the holding extension is
replaced back on call, you may have the
automatic hold recall after the desired time
elapses.
I.5 minutes: [31] [NEXT] [SELECT]
[SELECT] [MEMORY] [END]
The hold recall titne set can be removed ot
added at the customer’s request.
Programming
Programming Table
See page 6-20.
1. Dial (31).
“HOLD RECALL TIME” will be dis lav-
ed.
R -
2. Press the NEXT button.
“TIME: 30 SEC” will be displayed and
“30 SEC” will blink.
3. Repeat pressing the SELECT button until the
desired time (30 SEC, 1 MIN, 1.5 MIN, 2
MIN, DISABLE) is displayed.
4. Press the MEMORY button.
The LCD will stop blinking.
5. To return to the initial program mode, press
the END button.
3-46