Filter
Top Products
, ,___________...._.......
: :
area code with 3 digits
: :
: ;
NOTSTORED . . . . default (all memory locations)
: :
: :
(CLEAR)
--
[12][NEXTI[*~][C][MEMORY][END]
+SELECT]-I
.---..--------------until the desired memory location number appears
Description
For Service Clnss 3 (see “Toll Restriction-
Class Assignment”
on pflge 3-19.), up to 10
area codes can be selected for use in toll dinling.
d
All clrea codes except those entered will be
denied.
All extensions progmmmed for Service Class
Selections 3 shall be assigned to the same orea
code selection plan.
Programming
When Service Class 3 is programmed;
1. Dial (12).
“CLASS 3 AREA CODE” will be display-
ed.
2. Press the NEXT button.
“ENTER CODE NO.” will be displayed.
3.
Dial (00 through 09) or press the NEXT
button.
Example:
When dialing (00) or pressing the NEXT
button.
aThe LCD will show “0O:NOT STORED”
wh?n nothing is stored in memory location
number “00”.
When area code 212 has been stored,
“00:212” will be displayed.
4. Dial the area code, with 3 digits.
@To erase a wronx entry, press the CLEAR
button.
3-21
5. Press the MEMORY button.
@The memory indicator will be lit.
6.
To advance to the .next memory location
number, press the NEXT button.
To return to the previous memory location
number, press the PREV button.
To go to the desired memory location num-
ber, press SELECT button and the dial the
memory location number.
7. Repeat steps 4 to 6.
8. To return to the initial program mode, press
the END button.
Example:
To allow extension 12
to have
access to New
York City and the entire state of New Jersey,
program
the
following.
New York City has 2 area codes 212, 718 and
New Jersey 201, 609.
Enter 212 into the memory locntion number
“OO”, 718 into “Ol”, 201 into “02” and 609 into
“03”.
STEP
l...[ll] -iNEXT] [NEXT] [SELECT]
[SELECT] [MEMORY] [END]
STEP 2...[12][NEXTltNEXTl[212][MEMORY]
[NEXTj[718][MEMORY]
[NEXT)[201][MEMORY]
[NEXTj[609][MEMORY][END]
Programming Table -
See page 6-16.