Filter
Top Products
:t i
‘8
i,
:
‘!
.i
To place a call on exclusive hold:
To retrieve:
(Outside calls on hold)
(Intercom call on hold)
PRESS
"HOLD"
PRESS
AGAIN
PRESS
PRESS
“CO”
"KM"
ii
-
-
1
Description
Conditions
An intercom or outside call placed on exclusive
@An Intercom hold can be activated on one
hold can not be released by any extension other
extension only.
than the phofle which has placed the call on
hold.
@Air Outside call hold can be activated on six
CO’S.
.J
@If
a call is on hold jor more thall 30 minutes, a
,.*
i 2 Operation
hold tinle reminder will be sounded, and the
‘-
1. You are in conversation with an outside or
call will be terminated automatically.
internal party.
A hold time reminder is sounded through the
.:.
built-in speaker of the extension.
2. Press the HOLD buttor!.
The indicator of CO or ICM bllttorz which is
on hold will flash slowly (greeti color).
A confirmation torte of 2 beeps will be heard.
3. Press the HOLD button, again.
?;he indicator will flash in groups of 2 (green
color).
4.
To retrieve, press the ICM button or the CO
button whose indicator is flashing in groups
of 2 (green coLor).
The indicator on the ICM or CO button will
return to a steady green.
.:.;
eCa1l.r otz hold will be recalled either after
30 seconds, I rniriilte, I niirlute
Lid
30 secorlds or 2 minutes, once handset is
replaced (or the SP-PHONE button is
pressed). If hold recall time set is set to
“DISABLE”, will not be recalled. Refer to
“Hold Recall Time Set” on page 3-46.
0 The hold time reminder is activated, even
if
the
hold recall time set is’ programmed to “DIS-
ABLE”.
*When lifting the handset (or press the SP-
PHONE button) :
.
before recalliq....A dial tone will be heard
with the call on hold.
You mny dial another
phone number.
while recalling.. . OPlqiihe first call .on hold
wilM$?“released and entered
into the conversation mode.