Panasonic KX-T61610 Switch User Manual


 
INSTALLATION
Installation
Cautions
*Avoid insralling in the following places. (Doing so may resulr in malfunction, noise, or discoloration.)
1. In direct sunlighr and her, cold, or humid places. (Temperarure range: 32”F-104°F)
2. Sulfuric gases produced .in areas where there are thermal springs, etc. may damage the equipment or
contacls.
3.
Places in which shocks or vibrations are frequent or strong.
4.
Dusty places, or places where water or oil
may
come into contact with the unit.
5. Near high-frequency sewing machines or electric welders.
6. On or near computers, relexes, or other office equipmenr, as well as microwave ovens or air condirioners.
(Ir is preferable not lo install in the same room with the above equipment.)
7. Near radio broadcast anlennas (including short wave).
8. Insrall at least 6
feet
from radios and relevisiotls. (both rhe electronic modular switching system and EMSS
proprierary telephones)
9. Do not obslrucr area around (he electronic modular swirching system.
(for reasons of nlaitlfetlatlce atId
inspecrion-be especially careful lo allow space
for
cooling above and at rhe sides
of
the electronic modlilar
swirchitig sysrem)
Cautions
1. Do not wire the telephone cable in parallel with the AC power source, computer, telex efc.
If
the cables run
near rhose wires, shield the cables with metal tube ‘or use shield cables and ground the shields.
2. When cables run on the floor, use protectors or the like lo protect the wires where they may be stepped on.
Avoid wiring under carpets.
3. Avoid using the same AC 120 V power supply outlet
for computers,
telexes, and other office equipment.
Otherwise, the KX-%1610’s system operation may be interrupted by the inducrion noise from such
eqLtipnzenK.
4. Please use one pair telephone wire
for
extension conneclion
of
(telephone) equiptnents such as standard
telephone, data terminal, answering machine, computer, etc., except proprietary telephone (KX-T61630,
KX- T61620, KX- T61650, etc.).
2-2