Pelco C1566M-C Switch User Manual


 
86 C1572M (9/05)
DIRECTORY STRUCTURE
The directory structure of the CM9700-CC1 consists of the C:\ root directory, which contains several subdirectories and files. You can view the
contents of the root directory by entering dir and then pressing Enter at the C:\ prompt (refer to Figure 41).
Figure 41. CM9700-CC1 Root Directory
NOTE: The number of bytes shown at the bottom of the root directory list of your CM9700-CC1 may differ from the number of bytes shown in
Figure 41 depending on the configuration of your particular system.
As shown in Figure 41, the root directory contains the following subdirectories (indicated by <DIR>):
9700 directory
TESTPORT directory
DOS directory
The following sections provide information about each of the above directories contained within the root directory.
NOTE: As shown in Figure 41, the root directory also contains a 9760 directory and a NETWORK directory. The 9760 directory and the
NETWORK directory are not used by the CM9700-CC1.
11:16:15.93 Tue 07-19-2005 C:\>dir
Volume in drive C has no label
Volume Serial Number is 1B13-0FD8
Directory of C:\
COMMAND COM 54,645 05-31-94 6:22a
WINA20 386 9,349 05-31-94 6:22a
TVDISP EXE 13,608 02-26-97 2:25p
CONFIG SYS 82 10-14-97 10:03a
README TV 1,873 07-23-99 4:55p
AUTOEXEC BAT 73 07-19-05 11:05a
9700 <DIR> 07-19-05 10:54a
TESTPORT <DIR> 07-19-05 10:54a
9760 <DIR> 07-19-05 10:54a
NETWORK <DIR> 07-19-05 10:54a
TVPARA DAT 850 07-19-05 11:00a
DOS <DIR> 04-11-05 2:38p
12 file(s) 80,480 bytes
25,313,280 bytes free
11:16:17.96 Tue 07-19-2005 C:\>