Pioneer AVIC-Z1 Network Card User Manual


 
110
Chapter 11Using the AV Source (Built-in DVD Drive and Radio) AV
Touch key operation
1 Touch the source icon and then touch
[FM] to select the radio (FM).
When the source icon is not displayed, you
can display it by touching the screen.
Touch keys
(1) Touch: Selecting a desired frequency
from the list
Touch to recall the preset frequency.
To register the frequency currently being
received to the preset list, touch and hold the
preset list.
Touch and hold: Storing broadcast stations
You can register the frequency currently being
received to the preset list. You can easily store up
to six broadcast frequencies for later recall with
the touch of a key.
Touch to recall the preset frequency.
Up to 18 stations, 6 for each of three FM
bands can be stored in memory.
(2) Touch: Perform manual tuning
To perform manual tuning, touch or
briefly. The frequencies move up or
down step by step.
Touch and hold: Perform seek tuning
To perform seek tuning, keep touching
or for about one second and release.
The tuner will scan the channels until a broad-
cast strong enough for good reception is found.
You can cancel seek tuning by touching either
or briefly.
If you keep touching or , you
can skip broadcasting channels. Seek tuning
starts as soon as you release the keys.
You can also perform these operations by
using the TRK (/) button.
(3) Tuning in strong signals
“Tuning in strong signals” Page 110
(4) Storing the strongest broadcast frequen-
cies
“Storing the strongest broadcast frequen-
cies” Page 112
(5) Select a FM band
Touch [Band] repeatedly until the desired FM
band is displayed, FM 1, FM 2 or FM 3.
This function is convenient to prepare differ-
ent preset list for each band.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automati-
cally store the six strongest broadcast frequen-
cies under preset tuning keys P1P6 and once
stored there you can tune in to those frequencies
with a touch of the key.
1 Touch and hold [BSM].
BSM starts. The six strongest broadcast fre-
quencies will be stored under preset tuning
keys P1P6 in order of their signal strength.
To cancel the storage process, touch
[Cancel].
Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have saved using P1P6.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals for
good reception.
1 Touch [Local].
2 Touch [On] to turn local seek tuning on.
To turn local seek tuning off, touch [Off].
3 Touch or to set the sensitivity.
There are four levels of sensitivity for FM.
Level: 1234
The level [4] setting allows reception of only
the strongest stations, while lower settings let
you receive weaker stations.
(1) (5) (3)
(4)
(2)