Pioneer AVIC-Z1 Network Card User Manual


 
84
Chapter 9Using Hands-free Phoning NAVI
10Touch [Information] in the navigation
menu, and then touch [Phone Menu].
11Touch [Phone Settings].
The phone settings screen appears.
12Touch [Password].
13Touch any key to enter the password you
want to set and then touch [OK].
About Keypad operation Page 27
Four to eight characters can be entered for
a password.
Receiving a phone call
You can use the navigation system to receive a
call hands-free.
The map screen shows the icon while your cellu-
lar phone featuring Bluetooth wireless technol-
ogy is connected. You can recieve a hands-free
call only when the mobile phone is connected.
Answering an incoming call
The system informs you that it is receiving a call
by displaying a message and producing a ring
sound once.
1 When there is an incoming call, touch
.
When there is an incoming call, you can reject
the call by touching .
During a call, the is displayed at the
right-hand side of the screen.
2 To end the call, touch at the top right
of the screen.
The call ends.
If the received voice is too quiet to hear, you
can adjust the volume of the received voice.
Incoming Voice Page 91
Depending on the subscription status of the
caller ID service, the phone number of the
received call may not be displayed, and
[Unknown] appears instead.
You may hear a noise when you hang up the
phone.
Making a phone call
You can make a phone call in many different
ways.
Direct dialing
1 Touch [Information] in the navigation
menu, and then touch [Phone Menu].
2 Touch [Dial].
The phone settings screen appears.
3 Input the phone number, and then touch
to make a call.
To cancel the call after the system starts dial-
ing, touch .
4 To end the call, touch at the top right
of the screen.
Connecting icon