Pioneer AVIC-Z1 Network Card User Manual


 
114
Chapter 12Using the AV Source (Music Library) AV
Changing the title of the playlist or track
Page 108
The title information displayed on the CD play-
back screen and the recording screen is syn-
chronized with the one edited in the music
library. If you edit the title information in the
music library, the title displayed on each
screen will change accordingly.
Title information can only be edited when one
or more tracks in a disc is recorded in the
music library.
“Editing the playlist” Page 120
Recording all tracks in a CD
When you play back a CD that is not recorded, it
is automatically recorded in the music library
(hard disk drive).
All tracks are automatically recorded (Auto)
in the default setting.
Switching the recording mode (REC Mode)
Page 156
1 Insert the CD that you want to record.
Recording automatically starts.
To cancel the recording, touch [Stop].
When recording finishes, the system returns
to the normal playback screen of the CD in the
blank between current track and next track.
If the CD is scratched or damaged, no data
can be recorded on that part. In such a
case, the track that falls on that part may
be skipped.
Recording a CD manually
You can record only your favorite tracks in the
CD.
1 [REC Mode] is set to [Manual].
Switching the recording mode Page 156
The REC Mode cannot be changed during
recording.
2 Play back the track you want to record.
3 Touch [REC].
The track being played is recorded.
When recording finishes, the system returns
to the normal playback screen of the CD in the
end of the track.
To cancel the recording, touch [Stop].
Recording only the first track of
a CD
You can record only the first track of the CD. This
mode is useful when you want to record only the
first tracks from multiple CD singles (or EPs) con-
secutively.
1 [REC Mode] is set to [Single].
Switching the recording mode Page 156
The REC Mode cannot be changed during
recording.
2 Insert the CD you want to record.
Recording automatically stars for the first
track.
When recording finishes, the system returns
to the normal playback screen of the CD in the
end of the track.
To cancel the recording, touch [Stop].
Stopping CD recording
You can stop recording while recording a CD.
(Recording can resume depending on the record-
ing mode.)
1 Touch [Stop].
When REC Mode is [Auto] or [Single]:
Recording is paused, and the system starts
normal CD playback. To resume recording,
touch [REC]. Recording also resumes in the
following cases:
— When you switch to another source, and
then return to the CD source.
— When you turn off the ignition switch of the
vehicle, and then restart the engine.
When REC Mode is [Manual]:
Recording is stopped. Touch [REC] to record
the track being played.