Filter
Top Products
193
AppendixNAVI/AV
Other sources
This track cannot be added
to MyMix
The music library component is abnor-
mal.
Consult your dealer.
Name can not be used for
voice recognition. Try again.
In case some invalid character have
been entered and the system can not
convert it appropriate pronunciation.
Enter the different characters so that the
system can pronounce that.
Single recording mode will
only record the first track of
CD
Record the tracks other than the first
track of CD when the recording mode is
[Single].
When you set [Single] in [REC Mode], the
system only can record the first track of
CD. Set [Auto] or [Manual] in [REC
Mode] and retry. (➞ Page 156)
This CD cannot be recorded If you insert a CD which prohibit second-
generation copies or duplicate.
Use another CD and retry.
HDD is full. This CD cannot
be recorded
There is no free space for recording in
the hard disk drive.
Delete some tracks or playlist and try again
if you want to record that CD.
Unable to select appropriate
Track info due to multiple
entries in the database.
Some corresponded data is found in
Gracenote
®
Database, the system can-
not select one to append a title.
Enter the title manually, or try to retrieve
the title by touching [Update title].
All artist names in the playl-
ist are deleted because no
character is entered. Do you
want to proceed?
If you try to delete the artist name
entirely. The artist will not be displayed
in the artist group and artist name on
the information plate also will not be dis-
played.
If you enter the artist name again, the artist
name appears.
Message When What to do
Search failed. iPod is preparing playback.
Therefore, the operation is invalid now.
Wait until [Ready] disappear and try the
operation.
Invalid command - the
memo has not been stored.
• If you try to memorize 000 Channel to
MyMix.
• If you try to memorize the channel
which is OFF AIR to MyMix.
• If you try to memorize the channel to
MyMix while the error of XM tuner
occur.
Tune the appropriate channel and memo-
rize that.
Invalid command - the CH
has not been stored.
• If you try to memorize 000 or 001 Chan-
nel to TRFC button ’s preset.
• If you try to memorize the channel
which is OFF AIR to TRFC button ’s
preset.
• If you try to memorize the channel to
TRFC button ’s preset while the error
of XM tuner occur.
Tune the appropriate channel and memo-
rize that.
Message When What to do