Pioneer AVIC-Z1 Network Card User Manual


 
187
AppendixNAVI/AV
Nothing is displayed and the touch
panel keys cannot use.
The setting for the rear view camera
is incorrect.
Connect a rear view camera cor-
rectly.
The shift lever was placed in [R]
when the rear view camera was not
connected.
Press the AV button to return to the
source display and then select the
correct polarity setting for Camera
Input.
About Camera Input setting
Page 154
The back light of the LCD panel is
turned off.
Press the V button to turn on the
back light.
Touch panel key is not respond or dif-
ferent key is respond.
Touch keys deviate from the actual
positions that respond to your touch
for some reason.
Perform the touch panel calibration.
“Adjusting the Response Positions of
the Touch Panels (Touch Panel Cali-
bration)” Page 178
CD recording is not possible. The disc cannot record, such as MP3
disc, DVD-video, is inserted.
The disc other than normal music CD
can not be recorded.
CD recording doesn’t stop though
the record progress indicator shows
100%.
Music Library recording will be can-
celed after playback of the current
track is finished. (The recording
mode stops at the interval of the
tracks.)
Wait until the current track is ended
or change the source manually.
“NO SIGNAL” is displayed at the right
corner on the map.
While waiting for a response from
the XM tuner.
Wait for a while and try the operation
again.
You are in an area that cannot
receive XM tuner reception.
Move into an area that can receive
XM tuner reception.
Your current location provides very
poor reception.
Change your location.
“UPDATING” is displayed at the right
corner on the map.
Service subscription is either
XM audio only
or XM NavTraffic
stand alone.
Since the GEX-P10XMT is capable of
receiving both XM audio and XM
NavTraffic service, if you are sub-
scribed to only one or the other, the
system checks to see if you have
added another service to your
account since you last powered on
the navigation system. When you
subscribe to both services, this mes-
sage will stop appearing when you
turn the ignition ON (ACC ON).
Symptom Cause Action (See)