Filter
Top Products
Installation and Operation Manual Chapter 6 Troubleshooting and Diagnostics
ASMi-52 Ver. 2.5 Monitoring Performance 6-5
• For details on enabling the CRC-4 function, refer to Chapter 4.
• For the details on configuring T1 framing, refer to Configuring T1 Interface in
Chapter 4.
Displaying the Current E1/T1 Statistics
To display the current E1/T1 statistics:
1. From the Physical Port Statistics menu (Figure 6-1), select E1/T1 Port
Performances to display the local/remote unit E1/T1 statistics.
The E1/T1 Port Performances menu appears (see Figure 6-7).
2. From the E1/T1 Port Performance menu, select E1/T1 Current Performances
to display the current E1/T1 statistics or select E1/T1 Current Day
Performances to display the current day statistics.
The E1/T1 Port Performances screen appears (see Figure 6-8, and
Figure 6-9).
3. Press any key to exit the E1/T1 Performances screen.
ASMi-52
E1/T1 Port Performances
1. E1/T1 current performances ...
2. E1/T1 all intervals local performances ...
3. E1/T1 all intervals remote performances ...
4. E1/T1 current day performances ...
5. E1/T1 clear local performances
6. E1/T1 clear remote performances
>
ESC-prev. menu; !-main menu; &-exit; @-scroll
Figure 6-7. E1/T1 Port Performances Menu
If CRC-4 is disabled, a typical E1/T1 Current Performance screen will include only
BPV statistics, as shown in Figure 6-8 and Figure 6-9.
ASMi-52
E1/T1 current performances
Local Remote
Port number (1)
BPV last minute (0) (0)
ESC-prev. menu; !-main menu; &-exit; @-scroll
Figure 6-8. E1/T1 Current Performances Screen
Note