Filter
Top Products
Appendix B IR-IP Interface Module Installation and Operation Manual
B-2 Technical Specifications ASMi-52 Ver. 2.5
Application
Figure B-1 shows a typical application of the ASMi-52 unit equipped with the IR-IP
interface module.
Figure B-1. Typical Application of the ASMi-52 Unit with IR-IP
B.2 Technical Specifications
Router
Local IP Net Capacity
Supports up to 256 hosts on the local LAN IP net
Filtering Rate
35,000 packets per second IR-IP: technical
specifications
Forwarding Rate
30,000 packets per second
Buffer
256 frames (maximum size – 1534 bytes)
Delay
1 frame
Configuration
Telnet, through the 10BaseT interface
LAN
Standard
Conforms to IEEE 802.3
Data Rate
10 Mbps (20 Mbps for 10BaseT in full duplex mode)
Interface Type
10BaseT for use on UTP and STP media, terminated
in RJ-45 shielded 8-pin connector
Operation Mode
Full duplex or half duplex user-selectable
WAN
Protocols
• PPP (PAP/CHAP)
• Frame Relay (RFC 1490)
• HDLC-like framing