Filter
Top Products
Installation and Operation Manual Chapter 6 Troubleshooting and Diagnostics
ASMi-52 Ver. 2.5 Troubleshooting 6-15
Table 6-4. ASMi-52 Events
Terminal Message Description
CRC EVENT LINE A CRC errors are detected on line A
CRC EVENT LINE B CRC errors are detected on line B
SW DOWNLOAD FAIL Software download failed
BUFFER OVERFLOW More than 100 entries registered in the log file
WD RESET FROM GS Watchdog error from the SHDSL chipset
GS OUT OF SYNC ABORT SHDSL framer out of sync
GS LOSS OF CARRIER DETECT SHDSL carrier loss
GS SQ ERROR DETECT SHDSL signal quality value is more than 22.7 dB
GS CRC ERROR DETECT More than three SHDSL CRC errors were detected during the last
second
REP SEGD ERROR DETECT SEGD error from repeater: sync fail on another part of the span
TRAINING MODE STACK CPE Training state timeout is exceeded (3 min)
DEVICE PRIMARY CALL FAIL The primary number dial attempt has failed
DEVICE DIAL CALL FAIL The dial out call cycle has failed
6.4 Troubleshooting
Working with the Port Log File
ASMi-52 maintains a port alarm buffer, which can store up to 100 alarm messages.
The port log file specifies alarm or event name, severity (major or minor), status
(ON or OFF), and time elapsed since the last ASMi-52 reset.
To display the log file:
• From the Physical Port Status menu, select Port Log File (Main menu >
Monitoring > Physical Ports Status > Port Log File).
The Log File screen appears (see Figure 6-15).