Filter
Top Products
Chapter 3 Operation Installation and Operation Manual
3-10 Configuration Alternatives ASMi-52 Ver. 2.5
session over the dedicated timeslot has priority over management via the
10/100BaseT port.
1. Connect the E1/T1 line to the ASMi-52 E1 or T1 port.
2. Start a terminal management session and do the following:
Assign an IP address and an IP mask to the dedicated timeslot interface
Enable DTS management
Assign an E1/T1 timeslot for the management traffic.
3. Run an SNMP management application, such as RAD’s RADview, open Telnet
session, or manage ASMi-52 via
ConfiguRAD
.
Figure 3-9. Managing ASMi-52 via LAN Port and a Dedicated Timeslot
Managing ASMi-52 via Web Browser
ConfiguRAD is a Web-based remote access terminal management software. It
provides a user-friendly interface for configuring, collecting statistics, and
performing diagnostic tests on the ASMi-52 units.
To choose an option:
1. Click a link in the ConfiguRAD screen to display the next menu.
2. Once the target screen is displayed, select a value from the drop-down box or
enter a value in a text box.
Some of the ASMi-52 menus have a 'Save' option. When choosing options from
these menus, you must confirm your choice by selecting 'Save', otherwise your
entry will be ignored.
At the left-hand bottom corner, ConfiguRAD provides some auxiliary management
tools:
• Status – shows the number of users currently managing ASMi-52