Filter
Top Products
Installation and Operation Manual Appendix B IR-IP Interface Module
ASMi-52 Ver. 2.5 Advanced Setup B-15
B.9 Advanced Setup
The Advanced Setup menu is used to select the desired group of IR-IP
configuration parameters.
The parameters accessed through Advanced Setup menu supplement the
parameters available on the Quick Setup screen, by providing control over all the
other IR-IP parameters.
To perform advanced setup:
• From the Main menu, press 3.
The Advanced Setup menu appears (Figure B-9).
IR_IP <IR-IP> S/W Ver. 1.21 (date)
Quick Setup
Management Access
Advanced Setup
=====================================================================
1. Device identification
2. Interface Parameters
3. Protocol Parameters
4. Multicast IP
Press one of the numbers to select or ESC:
Figure B-9. Advanced Setup Menu
Defining the Device Identification
The Device Identification menu is used to define and store in the IR-IP logistic
information: the logical name of IR-IP, information on the contact person and
device location.
To define the device identification:
1. From the Advanced Setup menu, type 1.
The Device Identification menu appears.
2. Assign a device name for identification by the system manager (up to eight
characters). The assigned name is displayed in the screen header.
3. Enter the name of the person to be contacted with matters pertaining to this
equipment unit.
4. Enter the physical location of the device.
Defining the Interface Parameters
The Interface Parameters menu is used to control the operation of IR-IP interfaces.
To define the Interface Parameters:
1. From the Advanced Setup menu, type 2.
The Interface Parameters menu appears (Figure B-10).