Filter
Top Products
SonicWALL VPN Page 201
Launching the SonicWALL VPN Client
To launch the VPN client, select SonicWALL VPN Client Security Policy Editor from the Windows Start
menu, or double-click the icon in the Windows Task Bar.
Click My Connections, and right click to select Add > Connection at the top of the Security Policy
Editor window.
TIP! The security policy is renamed to match the SA name created in the SonicWALL. You can rename the
security policy by highlighting New Connection in the Network Security Policy box and entering the security
policy name.
Configuring VPN Security and Remote Identity
1. Select Secure in the Network Security Policy box on the right side of the Security Policy Editor
window.
2. Select IP Subnet in the ID Type menu.
3. Enter the SonicWALL LAN IP Address in the Subnet field.
4. Enter the LAN Subnet Mask in the Mask field.
5. Select All in the Protocol menu to permit all IP traffic through the VPN tunnel.
6. Select the Connect using Secure Gateway Tunnel check box.
7. Select IP Address in the ID Type menu at the bottom of the Security Policy Editor window.
8. Enter the SonicWALL WAN IP Address in the field below the ID Type menu. Enter the NAT Public
Address if NAT is enabled.