Hardware Descriptions Page 245
SonicWALL TELE3 TZ Front Panel
The SonicWALL TELE3 TZ front panel is shown below, followed by a description of each item.
SonicWALL TELE3 TZ Front Panel Description
• Power
Lights up when power is applied to the SonicWALL TZ.
• Test
Lights up when the SonicWALL TZ is first powered up and performing diagnostic tests to check
for proper operation. These tests take about 90 seconds. If the Test LED remains lit after this
time, the software is corrupt and must be reinstalled.
There are three Ethernet ports; one for each of the WorkPort, HomePort, and WAN ports:
• Link
Lights up when the Twisted Pair port is connected to a 10Mbps or 100Mbps hub or switch, or
directly connected to a computer. Note that the connected Ethernet device must support the
standard Link Integrity test.
• 100
Lights up when the Twisted Pair port is connected to a 100Mbps hub or switch or directly
connected to a computer with a 100Mbps network interface.
• Activity
Flashes when the SonicWALL TZX transmits or receives a packet through the Twisted Pair port.
Power LED
Link, 100, Activity
HomePort Port LEDs
Link, 100, Activity
WorkPort LEDs
Link, 100, Activity
Test LED
WAN Port LEDs