SonicWALL Internet Security Appliances Network Router User Manual


 
Page 38 SonicWALL Internet Security Appliance Administrator’s Guide
13. Enter the host name in the L2TP Host Name field.
14. Enter the server IP address in the L2TP Server IP Address field.
15. Enter your user name and password in the User Name and User Password fields.
16. Select Disconnect after ___ minutes of inactivity if you want to end an inactive connection. Enter
the number of minutes of inactivity before the connection is dropped. The default value is 10
minutes.
17. The L2TP settings are filled in once a connection is made to the L2TP settings.
18. Click Update. Once the SonicWALL is updated, you must restart the SonicWALL for the changes
to take effect.
Configuring NAT with PPTP Client
The SonicWALL Installation Wizard simplifies the initial installation and configuration of the
SonicWALL. The Wizard provides a series of menu-driven instructions for setting the administrator
password and configuring the settings necessary to access the Internet.
Tip Be sure to have your network information including your PPTP Server IP address, user name,
and password ready. This information is obtained from your ISP.
The first time you access the SonicWALL Management interface, the SonicWALL Installation Wizard
automatically launches and begins the installation process.
1. To configure your SonicWALL appliance, read the instructions on the Wizard Welcome page and
click Next to continue.
Setting the Password