SonicWALL Internet Security Appliances Network Router User Manual


 
Page 246 SonicWALL Internet Security Appliance Administrator’s Guide
SonicWALL TELE3 TZ Back Panel
SonicWALL TELE3 TZ Back Panel Description
Reset Switch
Erases the firmware and resets SonicWALL TZ to its factory clean state. This can be necessary
if the administrator password is forgotten, or the firmware has become corrupt.
Serial Port
DB-9 RS-232 Serial port for Command Line Interface support.
(3) Twisted Pair (10Base-T, 100Base-T) Ethernet Ports
(3) Auto switching 10Mbps/100Mbps Ethernet ports provide connectivity for both Ethernet and
Fast Ethernet networks. The Ethernet ports connect the SonicWALL TZ to the LAN, DMZ, and
WAN using Twisted Pair cable with RJ45 connectors.
Power Input
Connects to the external power supply that is provided with the SonicWALL TZ. The use of an
Uninterruptible Power Supply (UPS) is recommended to protect the SonicWALL TZ against
damage or loss of data due to electrical storms, power failures, or power surges.
Cooling Vents
The SonicWALL TZ is convection cooled; an internal fan is not necessary. Do not block the cooling
vents.
Reset Switch
Cooling Vents
WorkPort Ethernet Port
10Mbps/100Mbps
10Mbps/100Mbps
HomePort Ethernet Port
10Mbps/100Mpbs
5VDC,2A
Power inpu
t
WAN Ethernet Port