Filter
Top Products
Chapter 7 Upgrading the SAN 79
pkg_name is the name of the package you need to obtain the information on.
1. Upgrade your SUNWsan package to StorEdge SAN 3.0.
Before you start, check your system to see if it has been installed, and if it is already
up to date. Use the pkginfo command to see if it has been installed.
The system returns:
The output indicates that the SUNWsan package has already been installed. If your
system has the SUNWsan package installed, use the showrev command to see if it is
up-to-date.
The system returns:
The showrev results line indicates that the SUNWsan package is already up to date.
If patch 111847-xx has not been installed, install it using the patchadd command.
2. If your system does not have the SUNWsan package installed, install the new
SUNWsan package from your StorEdge SAN 3.0 software.
# pkginfo -l pkg_name
#
pkginfo SUNWsan
system SUNWsan SAN Foundation Kit
#
showrev -p | grep 111847
Patch: 111847-01 Obsoletes: Requires: Incompatibles: Packages:
SUNWsan
# patchadd
patch-location/111847-01
# pkgadd -d pkg-location SUNWsan