92 Sun StorEdge Network FC Switch-8 and Switch-16 Installation and Configuration Guide • October 2001
4. Verify that the selected Fabric device is configured.
Notice that the Occupant column of both c0 and c0::50020f2300006077
displays as configured, indicating that the c0 port has a configured occupants and
that the c0::50020f2300006077 device is configured.
The device is available on a Solaris host.
CODE EXAMPLE 8-1 is an example of the
luxadm(1M) output. Notice that two devices,
/dev/rdsk/c0t50020F2300006077d0s2
and
/dev/rdsk/c0t50020F2300006077d1s2,
are configured for the device represented by c0::50020f2300006077. This
indicates that the physical device represented by c0::50020f2300006077 has two
LUNs configured.
# cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c0 fc-fabric connected configured unknown
c0::50020f2300006077 disk connected configured unknown
c0::50020f23000063a9 disk connected unconfigured unknown
c0::50020f2300005f24 disk connected unconfigured unknown
c0::50020f2300006107 disk connected unconfigured unknown
c1 fc-private connected configured unknown
c1::220203708b69c32b disk connected configured unknown
c1::220203708ba7d832 disk connected configured unknown
c1::220203708b8d45f2 disk connected configured unknown
c1::220203708b9b20b2 disk connected configured unknown
CODE EXAMPLE 8-1
# luxadm display 50020f2300006077
DEVICE PROPERTIES for disk: 50020f2300006077
Status(Port A): O.K.
Vendor: SUN
Product ID: T300
WWN(Node): 50020f2000006077
WWN(Port A): 50020f2300006077
Revision: 0117
Serial Num: Unsupported
Unformatted capacity: 558448.000 MBytes
Write Cache: Enabled
Read Cache: Enabled
Minimum prefetch: 0x0