Filter
Top Products
162 Sun StorEdge Network FC Switch-8 and Switch-16 Installation and Configuration Guide • October 2001
7. Click the Apply button to save the changes.
The new Fabric contains four zones for this zone type. When the two Fabrics are
connected, the result contains zone 1 from both Fabrics combined in zone 1, zone 2
contains the ports defined for the original Fabric A, zone 3 contains the original
ports defined for zone 3 of Fabric B, and zone 4 contains the ports defined in the
original zone 2 of Fabric B.
After installing the HBA in F-Port mode on port-1, the devices on TL ports cannot
be seen.
Make sure the switch chassis ID is not 0. The chassis ID can be checked and
changed from the Switch Faceplate Display window. After changing the chassis
ID, click the Apply button. For more information on chassis ID, refer to the
SANbox-8/16 Switch Management User’s Manual for Sun StorEdge Network FC Switch
3.0.