Filter
Top Products
94 Sun StorEdge Network FC Switch-8 and Switch-16 Installation and Configuration Guide • October 2001
▼ To Unconfigure a Fabric Device
This procedure describes how to unconfigure a Fabric device that is attached to the
Fabric-connected host port c0.
1. Become superuser.
2. Identify the device to be unconfigured.
Only the devices on a Fabric-connected host port can be unconfigured.
3. Unconfigure the Fabric device.
Note – Before you unconfigure a Fabric device, stop all activity to the device and
unmount any filesystems on the Fabric device. If the device is under any volume
manager’s control, see the documentation for your volume manager for maintaining
the Fabric device.
# cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c0 fc-fabric connected configured unknown
c0::50020f2300006077 disk connected configured unknown
c0::50020f23000063a9 disk connected configured unknown
c0::50020f2300005f24 disk connected configured unknown
c0::50020f2300006107 disk connected configured unknown
c1 fc-private connected configured unknown
c1::220203708b69c32b disk connected configured unknown
c1::220203708ba7d832 disk connected configured unknown
c1::220203708b8d45f2 disk connected configured unknown
c1::220203708b9b20b2 disk connected configured unknown
# cfgadm -c unconfigure c0::50020f2300006077