Filter
Top Products
Chapter 8 Configuring the SAN 97
▼ To Unconfigure All Fabric Devices on a Fabric-Connected
Host Port
This procedure describes how to unconfigure all configured Fabric devices that are
attached to a Fabric-connected host port.
1. Become superuser.
2. Identify the Fabric devices to be unconfigured.
Only the devices on a Fabric-connected host port can be unconfigured.
3. Unconfigure all of the configured Fabric devices on a selected port.
Note – This operation repeats the unconfigure operation of an individual device
for all the devices on c0, and it can be time consuming if the number of devices on
c0 is large.
# cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c0 fc-fabric connected configured unknown
c0::50020f2300006077 disk connected configured unknown
c0::50020f23000063a9 disk connected configured unknown
c0::50020f2300005f24 disk connected configured unknown
c0::50020f2300006107 disk connected configured unknown
c1 fc-private connected configured unknown
c1::220203708b69c32b disk connected configured unknown
c1::220203708ba7d832 disk connected configured unknown
c1::220203708b8d45f2 disk connected configured unknown
c1::220203708b9b20b2 disk connected configured unknown
# cfgadm -c unconfigure c0