Filter
Top Products
Chapter 8 Configuring the SAN 115
Note – This operation repeats the unconfigure command of an individual device
for all the all devices on c2, and it can be time consuming if the number of devices
on c2 is large
4. Verify that all of the devices on c2 are unconfigured.
Notice that the Occupant column of c2 and all the devices attached to it are listed as
unconfigured.
# cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c0 fc-fabric connected configured unknown
c0::50020f2300006077 disk connected configured unknown
c0::50020f23000063a9 disk connected configured unknown
c1 fc-private connected configured unknown
c1::220203708b69c32b disk connected configured unknown
c1::220203708ba7d832 disk connected configured unknown
c1::220203708b8d45f2 disk connected configured unknown
c1::220203708b9b20b2 disk connected configured unknown
c2 fc-fabric connected unconfigured unknown
c2::50020f2300005f24 disk connected unconfigured unknown
c2::50020f2300006107 disk connected unconfigured unknown