Filter
Top Products
152 Sun StorEdge Network FC Switch-8 and Switch-16 Installation and Configuration Guide • October 2001
1. Verify network connection to Fabric:
Check that the correct IP address for the Fabric is entered in the Fabric Display. If the address is incorrect, then enter the correct IP
address for the network switch in the Fabric.
Verify thatthegateway addressis correctlyconfiguredon theworkstation. If the gatewayis incorrect,thenconfigure thecorrect gate-
way.
VerifythattheFabric isaccessiblethroughthenetwork. For example,pingtheswitchandverifythatresponsesarenotbeingdropped.
If the Fabric is not accessible, then diagnose network the problem, or try to access the Fabric from a different workstation.
TrytoaccesstheFabricfroma workstationonthesamesubnetworkastheFabric. If theFabricismanageableonthesamesubnetwork,
but is not manageable through a network gateway, then examine the network configuration (gateway address, subnet mask, etc.) on
the network switch to verify that it is correct..
Examine the switch itself. Verify that the switch is powered on, and that the heartbeat LED is blinking
normal ly. If the heartbeat indicates an error, then contact customer support.