Filter
Top Products
4-18 Sun Blade T6320 Server Module Service Manual • June 2009
5. Perform the procedures described in Section 4.8, “Finishing Component
Replacement” on page 4-28.
4.5 Removing and Replacing the Battery on
the Service Processor
Caution – Handle the components carefully to avoid damage.
1. Perform the procedures described in Section 4.2, “Common Procedures for Parts
Replacement” on page 4-3.
2. To remove the service processor from the chassis, pull back the plastic tab and
lift the handle (Section 4.4, “Removing and Replacing the Service Processor” on
page 4-15).
3. Place the service processor on an antistatic mat.
4. Carefully remove the battery (
FIGURE 4-11) from the service processor.