Filter
Top Products
4-28 Sun Blade T6320 Server Module Service Manual • June 2009
4.8 Finishing Component Replacement
4.8.1 Replacing the Cover
1. Place the cover on the chassis.
Set the cover down so that it hangs over the rear of the server module by about
an inch (2.5 mm).
2. Slide the cover forward until it latches into place (
FIGURE 4-16).
FIGURE 4-16 Replacing the Cover
4.8.2 Reinstalling the Server Module in the Chassis
Caution – Hold the server module firmly so that you do not drop it. The server
module weighs approximately 17 pounds (7.7 kg).
1. Turn the server module over so that the ejector levers are on the right side
(
FIGURE 4-17).
2. Push the server module into the chassis.
3. Close the latches.