Filter
Top Products
Chapter 3 Replacing Hot-Swappable and Hot-Pluggable Components 3-5
3. Close the latch to lock the drive in place.
4. Perform administrative tasks to reconfigure the hard drive.
The procedures that you perform at this point depend on how your data is
configured. You might need to partition the drive, create file systems, load data from
backups, or have data updated from a RAID configuration.
■ You can use the Solaris command cfgadm -al to list all disks in the device tree,
including 'unconfigured' disks.
■ If the disk is not in the list, such as with a newly installed disk, you can use
devfsadm to configure it into the tree. See the devfsadm man page for details.
3.3 Adding PCI ExpressModules
The PCI ExpressModules (PCI EMs) plug into the chassis. To verify installation and
to set up the PCI EMs see:
■ The service manual for your modular system chassis.
■ Sun Integrated Lights Out Manager 2.0 Supplement for Sun Blade T6320 Server
Modules, 820-2546