Filter
Top Products
4-1
CHAPTER
4
Replacing Cold-Swappable
Components
This chapter describes how to remove and replace field-replaceable units (FRUs) that
must be cold-swapped.
The following topics are covered:
■ Section 4.1, “Safety Information” on page 4-1
■ Section 4.2, “Common Procedures for Parts Replacement” on page 4-3
■ Section 4.3, “Removing and Replacing DIMMs” on page 4-10
■ Section 4.4, “Removing and Replacing the Service Processor” on page 4-15
■ Section 4.5, “Removing and Replacing the Battery on the Service Processor” on
page 4-18
■ Section 4.6, “Replacing or Installing the Sun Blade RAID 5 Expansion Module” on
page 4-20
■ Section 4.7, “Removing and Replacing the Sun Blade G2 RAID 0/1 Expansion
Module” on page 4-25
■ Section 4.8, “Finishing Component Replacement” on page 4-28
4.1 Safety Information
This section describes important safety information you need to know prior to
removing or installing parts in the Sun Blade T6320 server module.
For your protection, observe the following safety precautions when setting up your
equipment: