B-10 Sun Blade T6320 Server Module Service Manual • June 2009
● To delete a logical drive on the REM, use the DELETE card-number
LOGICALDRIVE drive-number command.
In this example, x is the number of the logical drive that you want to delete.
▼ To Label the Newly Created Logical Drive
Before the Solaris OS can install software onto the newly created logical drive, you
must label the drive.
1. Use the ./arcconf GETCONFIG card-number LD command to display the logical
drives on the REM.
2. Use the devfsadm command to find the newly created drive and load its
drivers.
3. To label the newly created drive, use the format command and select the
logical drive.
You can distinguish the logical REM drives in the output by looking at the
vendor/product ID string. The Sun StorageTek SAS RAID HBA card is displayed
as “Sun-STKRAID.” The last part of the string will display “EXT” (for external) or
“INT” (for internal), depending on the type of card you have.
# ./arcconf DELETE 1 LOGICALDRIVE x
# ./arcconf GETCONFIG 1 LD
# devfsadm