Filter
Top Products
Appendix B Creating a Bootable Array With the Sun Blade RAID 5 Expansion Module B-11
4. When the format process displays the Disk not labeled. Label it now?
prompt, type y and press Enter.
5. Exit the format process by typing quit and pressing Enter.
You now have a labeled logical drive.
6. Use the init 0 command, switch to the ok prompt, and use the boot net
command to reboot the system for normal network-based installation.
B.6 Next Steps
Install the Solaris OS and the HBA driver onto the bootable array, as described in
Appendix C.
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@780/pci@0/pci@9/scsi@0/sd@0,0
1. c0t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@780/pci@0/pci@9/scsi@0/sd@1,0
2. c2t0d0 <Sun-STKRAIDINT-V1.0 cyl 17818 alt 2 hd 255 sec 63>
/pci@7c0/pci@0/pci@8/scsi@0/sd@0,0
3. c2t1d0 <Sun-STKRAIDINT-V1.0 cyl 8907 alt 2 hd 255 sec 63>
/pci@7c0/pci@0/pci@8/scsi@0/sd@1,0
Specify disk (enter its number): 2
# init 0
# syncing file systems... done
Program terminated
r)eboot, o)k prompt, h)alt?
o
ok boot net