Filter
Top Products
2-24 Sun Blade T6320 Server Module Service Manual • June 2009
->show /SP/faultmgmt
2.5.4 Displaying the Environmental Status with the
ILOM CLI
The ILOM show command displays a snapshot of the server module environmental
status. This command displays system temperatures, hard drive status, power
supply and fan status, front panel LED status, voltage, and current sensors. The
output uses a format similar to the Solaris OS command prtdiag (1M).
At the -> prompt, type the show command.
The output differs according to your system model and configuration.
Note – Some environmental information might not be available when the server
module is in standby mode.
-> show /SYS/MB/V_VCORE
/SYS/MB/V_VCORE
Targets:
Properties:
type = Voltage
class = Threshold Sensor
value = 1.224 Volts
upper_nonrecov_threshold = 1.38 Volts
upper_critical_threshold = 1.34 Volts
upper_noncritical_threshold = 1.32 Volts
lower_noncritical_threshold = 1.15 Volts
lower_critical_threshold = 1.12 Volts
lower_nonrecov_threshold = 1.08 Volts
Commands:
cd
show