Filter
Top Products
2-22 Sun Blade T6320 Server Module Service Manual • June 2009
Use the web interface or type the show /SP/faultmgmt command for the
following reasons:
■ To see if any faults have been passed to, or detected by the ILOM firmware.
■ To obtain the fault message ID (SUNW-MSG-ID) for PSH detected faults.
■ To verify that the replacement of a FRU has cleared the fault and not generated
any additional faults.
2.5.3.1 Viewing Fault Status Using the ILOM Web Interface
In the ILOM web interface, you can view the system components currently in a fault
state using the Fault Management page.
FIGURE 2-10 Fault Management Page Example
The Fault Management page lists faulted components by ID, FRU, and TimeStamp.
You can access additional information about the faulted component by clicking the
faulted component ID. For example, if you clicked the faulted component ID, 0
SYS/MB/, the following dialog window appears displaying additional details about
the faulted component.