Filter
Top Products
Appendix B Creating a Bootable Array With the Sun Blade RAID 5 Expansion Module B-5
Note – In the following example, the -R flag is directing the pkgadd command to
use an alternate root so that the packages will be installed correctly onto the
miniroot image. When you substitute your own directory path for install_dir_path,be
sure to begin with a / to provide an absolute path name. Also note that -d. (dash d
dot) syntax before the package names.
B.4 Modifying the Product Installation
Directory on the Install Server
The product installation directory is the directory into which all other Solaris products
will be installed during the network install. On the network install server, the
directory is install_dir_path/Solaris_10/Product.
You must place a copy of the SUNWaac package in this product installation directory.
Doing so enables you to add the SUNWaac driver to the client machine after other
Solaris packages have been installed. Without the SUNWaac driver, logical drives,
including boot drives, will not be accessible to the operating system, and booting the
newly installed machine will fail.
▼ To Modify the Product Installation Directory
1. Obtain the SUNWaac package, as described in “Creating a Bootable Array Task
Map” on page 2.
2. Use the cp -r command to copy the SUNWaac package from the working
directory to the install_dir_path/Solaris_10/Product directory on the install
server.
# pkgadd -R install_dir_path/Solaris_10/Tools/Boot -d. SUNWaac
# pkgadd -R install_dir_path/Solaris_10/Tools/Boot -d. SUNWgccruntime
# pkgadd -R install_dir_path/Solaris_10/Tools/Boot -d. StorMan
# cp -r SUNWaac install_dir_path/Solaris_10/Product