Filter
Top Products
Chapter 2 Sun Blade T6320 Server Module Diagnostics 2-15
Standby
blink
Repeating sequence
consisting of a brief
(0.1 sec.) on flash
followed by a long
off period (2.9 sec.)
The system is running at a minimum level and is ready to be
quickly revived to full function (for example, the System Activity
LED).
Steady on Steady state Status normal; system or component functioning with no service
actions required.
Slow blink A transitory (temporary) event is taking place for which direct
proportional feedback is not needed or not feasible.
ILOM is enabled but the server module is not fully powered on.
Indicates that the service processor is running while the system is
running at a minimum level in standby mode and ready to be
returned to its normal operating state.
TABLE 2-5 Front Panel Buttons
Button Color Description
Power button gray Turns the host system on and off. Use a paper clip or other small
tipped object to completely press this button.
(reset) gray This button does not function on the Sun Blade T6320 server
module.
TABLE 2-4 LED Behaviors With Assigned Meanings (Continued)
Color Behavior Definition Description, Actions, and ILOM Commands