Filter
Top Products
Chapter 2 Sun Blade T6320 Server Module Diagnostics 2-49
2.9.1 Displaying System Components With the show
/SYS Command
To see examples of ILOM web interface and CLI commands that show component
status, see Section 2.5.4, “Displaying the Environmental Status with the ILOM CLI”
on page 2-24.
The show command displays the system components (asrkeys) and reports their
status.
1. At the -> prompt, type the show command.
An example with no disabled components.
An example showing a disabled component:
-> show /SYS/MB/USB0
/SYS/MB/USB0
Targets:
Properties:
type = USB Port
component_state = Enabled
Commands:
cd
show
->
-> show /SYS/MB/USB0
/SYS/MB/USB0
Targets:
Properties:
type = USB Port
component_state = Disabled
Commands:
cd
show