Filter
Top Products
3.2 Executing the Diagnostic Test 3 Tests and Diagnostics
PORTEGE A100 Maintenance Manual (960-460) 3-7
Use the up and down arrow keys to move the cursor to “ERROR STOP”.
Use the right and left arrow keys to move the cursor to the option to execute and press
Enter.
Selecting YES in ERROR STOP stops the test program when an error is occurred and
displays the error status. The operation guide will appear on the right side of the display as
shown below:
ERROR STATUS NAME [[ HALT OPERATION ]]
1: Test end
2: Continue
3: Retry
Press [1] Terminates the test program and returns to the subtest menu.
Press [2] Executes the next test.
Press [3] Restarts the test from the error.
Selecting NO in ERROR STOP displays the error status and increases error counter by
one if an error is occurred, and executes the next step.
6. Table 3-1 in section 3.3 describes the function of each test on the subtest menu. Table 3-4
in section 3.17 describes the error codes and error status for each error.